Cycling Water Bottle Buying Guide

The bike water bottle is often underestimated as to importance, yet it is not just a child and seeing how many different models are on the market we realize that you need a guide to choosing to make the right purchase.

Hydrate is an essential element in each sport, and thus also in cycling, hence the importance of choosing the right tool to quench their thirst, that is the best bicycle water bottle. First let me start with a general’s hat that can be applied to any type of bottle. In order for this to be valid it must be constructed with an element that is able to maintain the chemical and physical characteristics of the liquid that will place in the canteen. It won’t go well any plastic material to make a water bottle, but that this does not transmit smells and tastes to liquids that are put in the canteen and it is not treated with acids that generally are used to soften plastics non-food products on

That said, let’s see what are made the bottles. Until a few years ago bike water bottles were made of aluminum, glass or even modern ones are usually made of transparent or batch-dyed polyethylene as this material guarantees better resistance to stress and turns out to be a little heavy. The cap is usually made of polypropylene, a polymer that possesses greater mechanical properties compared to polyethylene.

As we said, we find different bike water bottles on the market, depending on the type of cycling you plan to do. Water bottles for road cycling are generally small and light, being important to maintain the speed of the vehicle. Have a spout of drunk outside so you could drink from these while pedaling, without missing a beat. Bike water bottles, however, differ from those for road cycling as they present a spout which serves as protection, to ensure that mud, water and land will not settle on the area where you drink.

Depending on the liquids you want to insert into the canteen, then, we find hot tank water bottles made of stainless steel AISI 304 or 316, odorless and suitable to hold liquids while drinking bottles for cold liquids suitable inner coating to contain liquid and keep them cool.

Finally, we find on the market of canteens for large volumes, whose capacity ranges from 0.75 litres until cups, these are designed for those cyclists who like to venture into areas where there are water reserves to access and which therefore need to always bring a vast reservoir of water.

Let’s get to the point of our bike water bottles selection guide, at the time of purchase make sure the bottle into the housing of the bicycle without force but at the same time without leaving room. In the first case, in fact, will struggle to pull the canteen at the time of use, in the second case, you risk losing it down the street.

Again, make sure the stopper works properly, trying to open it and close it several times before purchasing. Also check that the opening is simple, consider that, especially if you have a road bike, you’ll have to open it while bicycling. Therefore that the opening and closing of the canteen is comfortable.

Another control to do is to unscrew the cap of the water bottle, odor and smell the inside. A faint plastic smell is normal, but if you experience unpleasant odors or strong plastic smell might be a symptom of a substance not suitable for consumption during machining of materials that make up the bottle. For this reason you should always check on its bottom are stamped a fork and a glass, which is the symbol for the containment of food intended for food.

That being said, let’s move on to some tips and tricks that will allow you to maintain your canteen. Remember that the bottle, like any other object containing food or drink, should be washed with a solution of water and dish detergent and then rinsed thoroughly. After washing the bottle, leave it open, to dry for at least 8 hours.

You don’t need to wash the bottle every time you use it, but you don’t have to even leave water inside the same back home. Empty it and rinse every time you use your bike and remember, after having rinsed, let it dry open. Always to prevent the formation of unpleasant smells, it’s good to put the bottle with the nozzle open, or with the cap nuts.

Finally, before filling the water bottle to go out on a bike ride, rinse it with hot water. This will remove any dust that had settled.